Gree SXVD200LCJ2/A-M - Page 139

AIR-TO-WATERHEATPUMP MAINTENANCE
133
8) Remove the 4-way
valve
Remove the 4-way
valve
·Loosen the screws
fixing the coil of 4-way
valve。
·Remove the coil of
4-way valve。
·Unsolder the tubes
connected to the
4-way valve.
·Remove the 4-way
valve. [See Fig.11]
Note：When welding,
the valve
should be
covered by
wet cloth in
order to avoid
the high temp.
damage.
Fig.11
①. Remove gas valve
· Loosen the bolts
fixing the gas valve.
·welding out the pipe
connected to the gas
valve [See Fig.12]
Note：When welding,
the valve should be
covered by wet cloth
in order to avoid the
high temp damage.
Fig.12