Gree SXVD200LCJ2/A-M - Page 146

AIR-TO-WATERHEATPUMP MAINTENANCE
140
①. Remove gas valve
· Loosen the bolts
fixing the gas valve.
·welding out the pipe
connected to the
gas valve [See
Fig.12]
Note：When welding,
the valve should be
covered by wet cloth
in order to avoid the
high temp hurt.
② Remove liquid
valve
·Loosen the bolts
fixing the liquid valve.
·welding out the
pipe connected to
the liquid valve [See
Fig.12]
Note：When welding,
the valve should be
covered by wet cloth
in order to avoid the
high temp hurt.
Fig.12
Fig.13