Gree U-match Series

U-Match Series DC Inverter Service Manual
111
2. Disassembly of electric
parts box
Disassemble the fastening screw and
remove the electrical parts box. (As is
shown in the graph, there are 2
fastening screws in the circle and the
screws in the direction of arrow shall be
disassembled too.)
Disassembly of water-containing plate
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Illustration
Handling Instruction
1.Disassembly of cover plate
Disassemble the fastening screws on
the cover plate and remove the cover
plate. (As is shown in the graph, circle
represents 6 fastening screws under
the cover plate and the box represents
two fastening screws on
water-containing plate symmetrically
arranged both on left and right.)
2.Disassembly of
water-containing plate
Disassemble the fastening screws on
the water-containing plate, pull upward
and remove the water-containing plate.
Disassembled water-containing plate is
shown in the graph.
Disassembly of fan and motor
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Illustration
Handling Instruction
Disassembly of fan motor
Disassemble the fixing screws on the
fan components. (As is shown in
graph, circle represents 6 screws.)
Disassemble the fastening screws on
the fan and motor. Remove the fan.
(As is shown in the graph, box
represents screws.)