What to do if Gree VERSATI III Heat Pump does not heat although compressor is running?
If your Gree Heat Pump isn't heating despite the compressor running, a possible cause is refrigerant leakage, which requires leakage detection and refrigerant replenishment. Another potential cause is a malfunctioning compressor, which would need replacement.
What to do if my Gree VERSATI III Heat Pump has heavy noise of compressor?
Heavy noise from the compressor in your Gree Heat Pump can be caused by liquid slugging, which happens when liquid refrigerant enters the compressor. Check if the expansion valve is failing or the temperature sensor is loose, and repair if necessary. Another potential cause is broken internal parts in the compressor, which would require replacing the compressor.
Why won't my Gree VERSATI III compressor start?
If the Gree Heat Pump compressor isn't starting, it could be due to a power supply issue such as a reversed phase sequence. It may also be due to loose connection wires, which should be checked and re-fixed. A malfunction of the mainboard or the compressor itself could also be the cause, requiring repair or replacement, respectively.
General| Type | Air to Water Heat Pump |
|---|---|
| Series | VERSATI III |
| Refrigerant | R32 |
| Operating Temperature Range (Cooling) | 10°C to 48°C |
| Heating Capacity | 4.0 - 16.0 kW |
| Cooling Capacity | 4.0 - 14.0 kW |
| COP | Up to 4.5 (A7/W35) |
| EER | 3.2 - 4.3 |
| Power Supply | 220-240V, 50Hz |
To Next Page
