Gree Versati II+ - Error Code List

1
Design & Selection
1 Installation Example
CASE 1: Connecting Heat Emitters for Heating and Cooling(Under floor loop,Fan Coil Unit,and
Radiator)
Notes
①
The two-way valve is very important to prevent dew condensation on the oor and Radiator while cooling
mode;
②
Type of thermostat and specication should be complied with installation of this manual;
③
The Bypass valve must be installed to secure enough water ow rate, and should be installed at the
collector.
CASE 2: Connecting Sanitary Water Tank
Notes
①
In this case, three-way valve should be installed and should be complied with installation of this manual;
②
Sanitary water tank should be equipped with internal electric heater to secure enough heat energy in the
very cold days;