89
Installation and Maintenance
Service Manual
NOTE:Take heat pump for example.
24K
Step Procedure
1. Remove handle and valve cover
Twist off the screws used for xing the handle, pull
the handle upward to remove it.Loosen the screws
xing the valve cover and then remove it.
2. Remove top cover
Remove connection screws connecting the top
cover plate with the front panel and the right
side plate,and then remove the top cover.
3. Remove front grill
Remove the screws connecting the front grill and
the front panel. Remove the front grill.
top panel
grille
handle
valve cover
11. Removal Procedure
To Next Page
Loading...
