User’s Manual of Remote Controller
22
Notes:
①
.
The remote controller should be placed 1m away from the TV set or stereo
sound sets.
②
.
The operation of remote controller should be performed within its receiving
range.
③
.
If you need to control the main unit, please point the remote controller at the
signal receiving window of the main unit to improve the receiving sensibility of
main unit.
④
.
When the remote controller is sending signal, “ ” icon will be blinking for 1
second. When the main unit receives valid remote control signal, it will give
out a sound.
⑤
.
If the remote controller does not operate normally, please take the batteries
out and reinsert them after 30 seconds. If it still can't operate properly, replace
the batteries.
⑥
.
When replacing the batteries, do not use old or different types of batteries,
otherwise, it may cause malfunction.
⑦
.
When you won’t use the remote controller for a long time, please take out the
batteries.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
