User’s Manual of Remote Controller
20
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the
temperature detected by the remote controller to achieve the best air-conditioning
effect. In this case, you should place the remote controller within the valid receiving
range.
(12).
Setting timer
You can set the operation time of unit as you need. You can also set timer on and
timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not,
please set the time according to current time.
1).
Setting timer off
① Pressing TIMER OFF button, OFF is blinking and time displaying zone
displays the timer time of last setting.
② Press ▲ or ▼ button to adjust the timer time.
③ Press TIMER OFF button again to confirm setting. OFF is displayed and time
displaying zone resumes to display current time.
Press TIMER OFF button again to cancel timer and OFF is not displayed.
2).
Setting timer on
① Pressing TIMER ON button, ON is blinking and time displaying zone displays
the timer time of last setting.
② Press ▲ or ▼ button to adjust the timer time.
③ Press TIMER ON button again to confirm setting. ON is displayed and time
displaying zone resumes to display current time.
Press TIMER ON button again to cancel timer and ON is not displayed.
3.5 Introduction of special functions Setting child lock
(1).
Setting child lock
Press ▲ and ▼ button simultaneously to lock the buttons on remote controller and
is displayed.
Press ▲ and ▼ button simultaneously again to unlock the buttons on remote
controller and is not displayed.
If the buttons are locked, blinks 3 times when pressing the button and any
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
