Greenlee C3 Auto Whip Clad Cable Cutter User Manual

C3 Auto Whip Clad Cable Cutter
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
9
How to Access the System Menu
and Adjust the Date/Time
The date/time settings should be modied upon receipt
of the unit to reect your current time zone. this adjust-
ment must be made through the System Menu.
THE SYSTEM MENU SHOULD ONLY BE ACCESSED
TO MODIFY THE DATE/TIME SETTINGS; MAKING
ADJUSTMENTS TO SETTINGS OTHER THAN THE
DATE/TIME COULD PREVENT THE UNIT FROM
OPERATING PROPERLY.
1. Press the System Menu access function key as
shown in Figure 1.
2. Using the arrow keys, select "Set Time/Date" and
hit "Enter". You should now see Figure 2.
3. Using the arrow keys, select "Time Zone" and hit
"Enter".
4. Using the arrow keys, adjust the time zone (relative
to GMT), then hit "Enter" to save.
5. Using the arrow keys, select "Time" under "Local
Time" and hit "Enter".
6. Using the arrow keys, adjust the time (hours,
minutes, seconds in 24-hour format), then hit
"Enter" to save.
7. Press "Esc" twice more to exit System Menu.
Figure 1 Figure 2

Greenlee C3 Auto Whip Clad Cable Cutter Specifications

General

Brand	Greenlee
Model	C3 Auto Whip Clad Cable Cutter
Category	Cutter
Language	English