19
PROBLEM POSSIBLE CAUSE SOLUTION
TROUBLESHOOTING
Motor fails to start
when switch trigger
is depressed.
Motor runs,but cutting
blades do not move.
Trimmer damaged.
Do not use string trimmer.
Call for technical service.
Trimmer smokes
during operation.
Trimmer damaged.
Do not use string trimmer.
Call for technical service.
Battery is not secure.
Battery is not charged.
To secure the battery pack, make sure
the latches on the top of the battery pack
snap into place.
Charge the battery pack according to the
instructions included with your model.
To Next Page
Loading...
