To Next PageTo Next PageWhat to do if my GreenWorks 25137 Lawn Mower is not starting?
If your GreenWorks Lawn Mower isn't starting, it could be due to a low battery. Try charging the battery. If the battery is inoperable or won't take a charge, consider replacing it.
Why does my GreenWorks 25137 Lawn Mower motor stop while cutting?
Your GreenWorks Lawn Mower motor might stop while cutting because the cutting height is set too low; try raising it. Alternatively, the battery may have no power, so ensure it is charged.
How to fix a GreenWorks Lawn Mower that is vibrating at high speed?
If your GreenWorks Lawn Mower is vibrating at a higher speed, the blade may be unbalanced, unevenly worn, or excessively damaged; consider replacing it. Also, the motor shaft could be bent. In that case, stop the motor, remove the isolator key and battery, disconnect the power source, and inspect for damage. Have it repaired by an authorised service center before restarting.
Why is my GreenWorks 25137 Lawn Mower cutting grass unevenly?
If your GreenWorks Lawn Mower is cutting grass unevenly, it might be because the lawn is rough or the cutting height is set improperly. Move the wheels to a higher position, ensuring all wheels are at the same cutting height for even cutting.
Why is my GreenWorks 25137 Lawn Mower hard to push?
Your GreenWorks Lawn Mower might be hard to push due to high grass, the rear of the mower housing snagging in heavy grass, or the cutting height being too low. Raise the cutting height to resolve this.
General| Brand | GreenWorks |
|---|---|
| Model | 25137 |
| Category | Lawn Mower |
| Language | English |
The lawn mower is capable of amputating hands and feet, and throwing objects.
Never mow while people, especially children, or pets are nearby.
Technical details of the mower, battery, and charger.
Insert the isolator key, press the start button, and pull the power lever.
Step-by-step guide for changing the mower blade.
