8
ELECTRICAL
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that
is 120 volts, AC only (normal household current), 60 Hz. Do not operate this product on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If
the product does not operate when plugged into an outlet, double-check the power supply.
DRIP LOOP (
See Figure 1.)
and plug, we recommend using a simple drip loop as shown below.
Fig. 1
Drip loop
Pressure washer power cord
To Next Page
Loading...
