GreenWorks GPW2000-1 - Assembling the Wheels; Assembling the Power Cord Arm

ASSEMBLING THE WHEELS
See Figure 3.
• Insert an axle (A) through a wheel (I), the frame of the unit, and then a washer (J).
• Insert a cotter pin (K) through the hole in the axle to secure. Repeat for second wheel.
ASSEMBLY
Fig. 3
ASSEMBLING THE POWER CORD ARM
See Figure 4.
• Line up the screw sleeves with the holes in the upper handle and push through.
• Insert the screw and turn clockwise with a Phillips head screwdriver (not included) until the
screw is tight.
Fig. 4
A
K
J
I
A
12