GreenWorks GPW2000-1 - Electrical; Electrical Connection; Drip Loop

8
ELECTRICAL
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that
is 120 volts, 60 Hz, AC only (normal household current). Do not operate this product on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat.
DRIP LOOP
G#(*"+>+/'(2.'+"(5"#9(4#2,/6(.3#/6('1+(*#2+"(&.?3+7(./$(*#)),?38("+.&1,/6('1+(+3+&'",&.3(#%'3+'(
and plug, we recommend using a simple drip loop as shown below.
W A R N I N G
Keep the extension cord clear of the working area. Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can
result in serious personal injury.
Dri
p
Loo
p
Power cord
Fig. 1