GreenWorks GPW3100C - Connect the High-Pressure Hose; Install the Power Cord Hook; Install the Spray Gun Holder

3. Secure the front panel with screws.
7.3 INSTALL THE SPRAY GUN HOLDER
1. Mount the spray gun holder onto the upper
handle.
2. Secure the spray gun holder with the screw.
7.4 INSTALL THE POWER CORD HOOK
1. Mount the power cord hooks and fixtures onto the
lower handle.
2. Secure the power cord hooks and fixtures with
the screws.
7.5 CONNECT THE HIGH-PRESSURE HOSE
1. Uncoil the high-pressure hose and connect one
end of the hose to the base of the spray gun.
Tighten it securely by hand.
2. Attach the other end of the high-pressure hose to
the high-pressure outlet (located on the left side
of the pump) and tighten securely by hand.
7
English
EN