GREINER MULTILINE NEXT DC - Type Plate

1 Introduction
6 / 72
Instruction manual - MULTILINE NEXT DC
© 2019 GREINER GmbH
GREINER_multiline_next_dc_manual_EN_4225502_rev_2.docx
1.6 Type plate
The type plate of the couch is located (depending on the version) either at the rear of the plastic cover of the
lower part or on the outside of the bearing (not shown).
It contains the following information (see also 9.4 Technical data, if necessary).
Symbol
Meaning
Symbol
Meaning
Manufacturer
Product name
Cushion
Cushion colour or type
Serial number
CE marking
Warning
Follow the instructions
Date of manufacture
Customer
Customer number or name
Safe working load
V in:
Input voltage/frequency
Alternating current
I in max.
Input current
U out:
Output voltage
IPX4
IP rating
Op:
Duty cycle
Indoor application
Protection class I
Thermal fuse element
Applied Part: Type B
No domestic waste
Isolating transformer
1. Type plate (example)
Fig. 1 Type plate - plastic cover
Further type plates can be found on all electrical components.
Type plates are documents that may not be altered or removed.
Damaged or lost type plates must be replaced true to the original.
1