Fast Deposit Module CA10 User Manual
Confidential material of GRG, No disclosure to unauthorized Party 2 / 35
2. Technical parameters
Support the fourth and fifth sets of all
RMB above 1 yuan (upgrade to
support multinational currencies).
500 notes for the input slot
(optionally 1,000 notes), 200 notes
for the escrow slot, 100 notes for the
output slot
0 ℃ ～ 40 ℃ 20% ～ 90% RH
(non-condensing)
Dimensions of
supported
envelope
Max. length 178 mm × width 90 mm
×thickness 15 mm
1 input slot, 1 output slot and 1 escrow
slot
Length 423 mm × Width 3,40 mm ×
Height 394 mm
3. Note processing procedure
3.1 Loading procedure
As shown by the red path in Figure 1-2, the notes fed into the note validator through feeder roller
from the input slot pass through the thickness assembly and arrive at lower transport. The notes
validated as acceptable enter into the escrow slot through the diverter as shown by the red path;
and the notes validated as unacceptable enter into the reject slot through the diverter as shown by
the blue path.
To Next Page
Loading...