Need help?Do you have a question about the GRG Banking CA-10 and is the answer not in the manual?
General| Model | CA-10 |
|---|---|
| Category | Control Unit |
| Manufacturer | GRG Banking |
| Interface | RS232, USB |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Dimensions | 200mm x 150mm x 50mm |
| Power Supply | 12V DC |
Details specifications like currency support, loading speed, capacity, and operating environment.
Instructions for installing the CA10 support software on a PC.
Instructions for updating the firmware of the CA10's main control board.
Instructions for upgrading the Digital Signal Processor (DSP) firmware.
Instructions for upgrading the Field-Programmable Gate Array (FPGA) firmware.
Method to look up and understand error codes for troubleshooting CA10 faults.
Initiates reading thickness zero value and K value from the CA10.
Details on how to physically adjust thickness settings for calibration.
Using a screwdriver to adjust potentiometer for thickness zero value.
To Next Page