64
Specications are subject to change without prior notication From serial number 7027
GM44 LITTLE JACK RIPPER
The Little Jack machine is a medium duty
machine with an easy to change shear pin
breakout system. Little Jack is most at
home doing general ripping and pasture
renovation, and with its optional coulters it
can leave a pasture paddock looking like
its barely been touched.
Little Jack oers a heavy duty head
stock and uses the same heavy duty
tines as the bigger Jack Machine. These
standar features ensure that this medium
duty machine has maximum strenth and
durability for it’s size.
DEEP DIGGER
The Deep Digger breaks up hardpan and
compacted soils. By opening the subsoil,
compacted ground can be rejuvenated,
allowing better drainage, root growth and
mineral osmosis.
The Deep Digger is available in both
linkage and trailing designs. Heavy
Duty tines are set in a characteristic “V”
formation for quick and easy penetration
and draft reduction.
All tines can be removed to a non-working
position if wide tine spacing or a narrower
width is desirable.
The machine is available in sizes 1 up to
15 tines.
Grader Blade is perfect for many
varied applications from professional road
maintenance crews to maintaining farm
roads and tracks. The Grader Blade is
an extremely robust blade with the most
features on the market.
It can be optioned up so there is 4 way
hydraulic movement. If hydraulic banks
are in short supply on the tractor you can
get optional Electronic over hydraulic
diverter which allows you to operate all 4
sets of hydraulics from just 2 sets in the
tractor cab.
Available in 1.8, 2.4 & 3 mtr models.
To Next Page
Loading...