Need help?Do you have a question about the Grizzly DEEP DIGGER and is the answer not in the manual?
General| Brand | Grizzly |
|---|---|
| Model | DEEP DIGGER |
| Category | Farm Equipment |
| Language | English |
Details on locating and understanding the machine's serial number plate for identification.
Explanation of warning terms (Danger, Warning, Caution, Important) and their significance.
Illustrations and explanations of safety decals found on the machine.
Defines the operator's duties regarding safe operation, training, and manual adherence.
Lists necessary qualifications, training, and condition knowledge for safe operation.
Critical safety advice for operating, transporting, and maintaining the machine.
Details warranty terms, coverage, exclusions, and owner responsibilities for claims.
Specific warranty notes for tyres, hydraulics, discs, and scrapers.
Technical details and dimensions for different Deep Digger models.
Table of recommended torque values for various bolts used in the machine.
Instructions for safely loading and unloading the Deep Digger machine.
Step-by-step guide for assembling the Deep Digger from a flat-packed state.
Procedure for connecting and setting up the machine's hydraulic circuits.
Guidance on setting the correct pull height and tongue for optimal ripping performance.
Step-by-step instructions for safely connecting the tractor to the Deep Digger.
Steps for securing and preparing the machine for safe transport.
Advice on operating depth, speed, hard pan removal, and turning for effective ripping.
Instructions for cleaning, greasing, and protecting the machine during storage.
Identification of all grease points and recommended greasing schedule.
Essential checks to perform before operating the machine.
Guidance on maintaining tines, points, bearings, and tyres.
Basic maintenance and care for the machine's hydraulic system.
Details on maintenance tasks at specific operating hour intervals.
Instructions for replacing worn points and broken shear pins.
Procedure for adjusting the preload on wheel bearings.
Steps for removing and installing ripper tines.
Detailed maintenance for hydraulic circuits, filters, and cylinders.
Part breakdown for the 7-tyne trailing assembly kit.
Troubleshooting guide for common operational problems like ripping depth and point wear.
Step-by-step guide for removing air from the hydraulic system.
Instructions for synchronizing cylinders and diagnosing creeping issues.
To Next Page