Grizzly DEEP DIGGER - Page 69

69
Specications are subject to change without prior notication December 2019
TINY RANGE
The TINY 230 is the starting point in the
TINY range of Heavy Duty Disc ploughs.
The heavy frame construction is ideal for
Heavy Duty work such as cotton, land
clearing and getting into hard to penetrate
soils. The TINY 230 has 230mm disc
spacings and up to 32” x 10mm scalloped
discs and uses the proven bearing
design found in the Field Boss and other
Heavy Duty Grizzly ploughs. The narrow
spacings also make it ideal at cutting out
at shallower depths and with plenty of
otation available with optional tyres it
can perform primary and secondary tillage
needs.
The TINY 290 takes things to the next
level in weight and robust design. Made
using a full frame and gangs of 16mm
thick RHS. The 290mm spacings and
either 32” x 10mm discs or optional 36” x
1/2 “ discs allow for deep penetration and
handling the toughest country. Often used
for cutting out tree regrowth or controlling
tough woody regrowth and renovating
bu󰀨el grass country. The TINY is also
used for mixing of lime and clay deep
into acidic or non-wetting soils with great
success.
The TINY 390 is the ultimate in heavy
machines – o󰀨ering up to a massive
400kg of weight per disc with its 390mm
disc spacings and 36” x ½” discs. Ideal
for heavy duty mixing jobs at maximum
depths or for breaking into hard soil
conditions.
The TINY 460 is tted with 42” discs and
is designed for use where deep working
is required. Deep mixing of all soil types
300mm and deeper as well as getting a
cut out of tree roots. This machine it truly
impressive to see and owners of these
machines are truly impressed with its
performance. Break open country in a way
you thought couldn’t be done.
All the TINY range folds down to an
amazing 3.5m road transport.