Grizzly Extreme Series User Manual (English)

Other manuals for Grizzly Extreme Series

Owner's Manual92 pages

Manual Insert32 pages

Questions and Answers:

N
Nicholas FrancisAug 27, 2025
What causes the blade to track incorrectly on my Grizzly Extreme?
- D
  Dawn VargasAug 27, 2025
  If the Grizzly Saw blade tracks incorrectly or comes off the wheels, consider these possible causes. The tracking might not be adjusted properly, so adjust the tracking. The wheels may not be coplanar, adjust the wheels to be coplanar. The blade tension could be too loose, increase the blade tension. Blade guides or support bearings might be too tight, properly adjust them. Avoid feeding the workpiece too fast, feed the workpiece slower. Using the incorrect blade for the operation can cause tracking issues, install the correct blade. A worn or dull blade can also cause problems, install a new blade and remove tension from the blade when not in use. Damaged or worn rubber tires or wheels can be the cause, replace them and remove tension from the blade when not in use.
A
Abigail CarpenterAug 27, 2025
Why are my workpieces rough or scored when using my Grizzly Extreme Saw?
- C
  Christian GardnerAug 27, 2025
  If your finished workpieces are rough or show scoring when using the Grizzly Saw, several factors could be responsible. The blade may be overloaded, twisting due to too fine TPI, or being too narrow for the cutting task; decrease the feed rate and ensure proper TPI. The blade's TPI could be too coarse, or the tooth style might be incorrect; use the correct blade for the material and cutting speed. A loose blade can flutter, so properly adjust the blade tension. Incorrect blade tracking can also cause roughness, so adjust the blade tracking. If the blade has missing or bent teeth, or a faulty weld, replace the blade.
W
William AndersonAug 25, 2025
What to do if my Grizzly Extreme blade slows, smokes, or overheats?
- A
  aatkinsAug 26, 2025
  If your Grizzly Saw blade slows down, smokes, overheats, or wears unevenly, several factors could be at play. First, the blade might be contacting the table insert; adjust the blade guides to eliminate side pressure and properly align the table. Misadjusted or worn blade guides can also cause this issue; adjust them or replace them if worn. Ensure the blade is installed correctly with the proper rotation. Reduce side pressure by feeding the workpiece straight into the blade. Check wheel alignment and adjust them to be coplanar. Also, ensure the fence is parallel with the blade. A dull or incorrect blade can cause these issues, so replace it. Lastly, a loose, worn, or slipping V-belt can be the culprit, so tighten or replace it if necessary.
J
johnathanoconnellAug 25, 2025
Why does my Grizzly Extreme blade keep breaking?
- C
  Christopher MitchellAug 25, 2025
  If the Grizzly Saw blade is breaking or cracking, it might be due to several reasons. The blade tension could be too tight and needs adjustment. The blade might be incorrect for the task, so ensure you're using the right one. You may be applying too much pressure, so reduce the feed rate. Avoid cutting corners too sharply; use wider arcs or relief cuts. Other causes include a dull or worn blade, incorrect tracking, or misadjusted blade guides. Adjust the blade guides and support bearings properly to prevent the blade teeth from hitting the guides during cutting. If the blade is dull, worn, or has a faulty weld, replace it. Adjust blade tracking to correct it.