To Next PageTo Next Page
Need help?Do you have a question about the Grizzly G8994 and is the answer not in the manual?
General| Spindle Taper | MT#2 |
|---|---|
| Tailstock Taper | MT#2 |
| Motor | 1 HP |
| Spindle Bore | 0.787" |
| No Load Speed | 1720 RPM |
| Spindle Thread | 1"-8 TPI |
Defines DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Provides essential safety practices for operating power tools, covering work area, children, and tool usage.
Continues safety advice on extension cords, apparel, securing work, and tool maintenance.
Identifies key components and controls of the jig saw, including switches and adjustments.
Lists technical details such as speed, motor power, blade type, and weight.
Guidance on selecting blades based on material thickness, curve tightness, and T.P.I.
Step-by-step instructions for securely installing and removing jig saw blades.
Explains the four orbital action settings and their effects on cutting different materials.
Details on adjusting blade speed using the trigger and recessed switch for optimal cutting.
Instructions on using the chip blower for dust removal during cutting operations.
How to check and set the footplate for precise 90-degree cuts and blade squareness.
Instructions for setting the footplate for angled cuts (±45°) and flush cutting.
Advice on avoiding overload, ensuring workplace safety, and inspecting the tool before use.
Information on keeping the saw clean, storing it properly, and the importance of qualified servicing.
Details the 1-year warranty, exclusions, limitations, and procedures for returns.
Form for customers to provide purchase details and product feedback for marketing purposes.
