OM-BPM-G
ThermostatThermostat
Vent
Power
Switch
Cover
Indicator
Light
Manual Tilt
Handwheel
Stainless Steel
Console
The unit will arrive completely assembled,
wrapped in protective plastic on a heavy skid, in a
heavy cardboard carton. Immediately upon receipt,
inspect the carton for damage. Report any
apparent shipping damage or an incorrect
shipment to the delivery agent.
When installation is to begin, get someone to
assist in removing the carton. Lift it straight up
and away from the unit. Do not simply raise it
and push backwards - it will break the cover
assembly vent handle. Write down the model
number, serial number, and installation date of
your unit, and keep this information for future
reference. Space for these entries is provided at
the top of the Service Log in this manual.
Cut the straps holding the unit on the skid, and lift
the unit straight up off the skid.
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT.
UNIT WEIGHS 420 TO 560 LB (190 TO 255
KG). FOR SAFE HANDLING, INSTALLER
SHOULD OBTAIN HELP AS NEEDED, OR
EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A
FORKLIFT, DOLLY, OR PALLET JACK) TO
REMOVE THE UNIT FROM THE SKID AND
MOVE IT TO THE PLACE OF INSTALLATION.
The unit is strapped to a skid, and shipped in a heavy cardboard carton.
(Shown is model BPM-40G with optional right side mounted, double pantry faucet assembly.)
To Next Page
Loading...
Need help?
General
