Growatt 10000UE - Warranty conditions; Exclusions from Limited Product Warranties; Liability Limitations

- 21 -
Fig.5.1.3
B. AC connector 2:
Assembly procedure:
1) Unscrew the AC connector by hand and slotted screwdriver into four components as Fig.5.1.4:
Fig.5.1.4
2) Connect 5 cables into their respective channels on the AC terminal shown as Fig.5.1.5, for the
mark beside every socket, ‘N’ represents Neutral, ‘1, 2, 3’ represent 3 live channels and ‘E’ is
ground, tighten all screws (1.0Nm (9 lbf. in.) max).
Fig.5.1.5 Fig.5.1.6
3) Insert the contact into the body with slotted screwdriver (1.13Nm (10 lbf. in.) to 1.36Nm (12 lbf.
in.)), screw up other components of the connector as Fig.5.1.6 -5.1.7.