Growatt MID TL3-XH Series - Notes on this manual; 1.1 Validity; 1.2 Intended audience; 1.3 Symbols in this document

This manual is intended to provide product information and installation instructions
regarding MID TL3-XH inverters manufactured by Shenzhen Growatt New Energy
Co.,Ltd.(hereinafter referred to as Growatt). Please read this manual carefully before
using the product. Please note that the content of this manual is subject to change
without.
notice: This document is valid for the following device types:
MID 11KTL3-XH
MID 12KTL3-XH
MID 13KTL3-XH
MID 15KTL3-XH
MID 17KTL3-XH
MID 20KTL3-XH
MID 25KTL3-XH
MID 30KTL3-XH
WARNING
DANGER
Symbol
Description
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
1.3 Symbols in this document
1.3.1 Symbol conventions
Warning notes indicate possible hazards to the equipment or personnel. It calls attention
to a procedure which, if not correctly performed or adhered to, could result in damage or
destruction of the instrument and personal injury.
1.3.2 Label description
CAUTION
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
Information that you must read and know to ensure optimal
operation of the system.
NOTICE
Information
Symbol
Explanation
Beware of high voltages
Beware of fire
Beware of hot surface
Delay discharge: observing a waiting time of 5 minutes
Grounding: indicates the position for connecting the PE cable
Direct Current (DC)
Alternating Current (AC)
Refer to the manual
CE marking
The inverter complies with the requirements of the applicable EU
directives
Do not dispose of the product together with the household waste
but in accordance with the disposal regulations for electronic waste
applicable at the installation site
This manual is intended for professional electricians who possess the required
qualifications.Reading through this manual and observing all the precautions, qualified
electrical technicians will be able to properly install, configure and troubleshoot the MID
TL3-XH series inverters.
Should any questions arise during installation, you can visit www.ginverter.com and
leave a message. Or you can call our 24-hour service line at +86 755 2747 1942.
1.2 Intended audience
1 Notes on this manual
1.1 Validity
2