Manufacturer warranty 14
Please refer to the warranty card.
Decommissioning 15
15.1 Dismantling the Inverter
1. Disconnect the inverter as described in section8.
2. Remove all connection cables from the inverter.
15.2 Disposing of the Inverter
Do not dispose of faulty inverters or accessories together with household
waste. Please accordance with the disposal regulations for electronic waste
which apply at the installation site at that time. Ensure that the old unit and,
where applicable, any accessories are disposed of in a proper manner
Danger of burn injuries due to hot enclosure parts!
Wait 20 minutes before disassembling until the housing has cooled down.
3. Screw off all projecting cable glands.
4. Lift the inverter off the bracket and unscrew the bracket screws.
15.3 Packing the Inverter
If possible, always pack the inverter in its original carton and secure it with tension belts. If it is
no longer available, you can also use an equivalent carton. The box must be capable of being
closed completely and made to support both the weight and the size of the inverter.
15.4 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between -25°C and
+60°C.
To Next Page
Loading...
Need help?
General