Growatt SPA 1000TL - 5.2 Tools and instruments; 5.3.1 Attention Layout

10
9
•Do not install the machine near television antenna or any other antennas and antenna
cables.
•Don't install the machine in the living area.
•Be sure that the machine is out of the children's reach.
•Taking the battery fixing space into account, about the dimensions please reference
user manual.
•The Inflammable and explosive dangerous goods must not be placed around battery in
case of cause serious danger.
1 2 3 4 5
5.2 Tools and instruments
5.3 Installation Instructions
5.3.1 Attention Layout
No.
Description
1
Press battery terminal connector
2
Unscrew nut
3
Unscrew screw
4
Knock explosion bolt
5
Drill holes on the wall
Fig 5.4
Fig 5.5
Fig 5.6
Table 5.1
LAN line RJ45 sequence as follow：
PIN
1
2
3
4
Color
White orange
Orange
White green
Blue
PIN
5
6
7
8
Color
White blue
Green
White brown
Brown
LAN line 1-8 colors as below:
There're three types of sensors for the use of SPA Series. One is wired current sensor, the
other one is meter sensor or SP-CT ,if you choose wired sensor or meter . Before installing
you should know something that as below: The cable of wired sensor and meter is
suggested not longer than 15 meters. So you need to consider the length between SPA
Series with combiner box for the sensor should be installed in the live line. And if you
installed SP-CT for sensor, Distance recommended not more than 30 meters.
The installation layout of energy storage machine at home as following:
Table 5.2
Fig 5.7
Inverte r
PV Array
ACCoupled
Electic meter
CT1
L lin e
L,N
L,N
10m
5m
5m
AC
Breaker
DC
Breaker
AC
Breaker
Sensor
Load
Load
EPS
Battery
EPS
AC
Grid
2
3
ATSE
ACCoupled
AC
Breaker
SPA Inver ter
Sensor
CT2
L lin e
5m
1
ACCoupled
10m
CT or M ete r
AC
PV
Grid
L-lin e
Load
Grid
L-lin e
Inver ter
CT2CT1