c Dry the area where the reclosable fasteners are to be
affixed.
2. Remove the protective foils from the reclosable fasteners.
3. Align the fastening plate vertically.
4. Firmly press the fastening plate with the reclosable fasteners
into place.
5. Check that the fastening plate is firmly attached.
5.3.2 Installing the filling level indicator on the wall
Prior to installing the device on the wall, check whether the dis-
tance of max. 2.5 m between the filling level indicator and the level
probe can be maintained.
1. Select a suitable and easily accessible location on the wall.
2. Align the fastening plate vertically.
To Next Page
Loading...
Need help?
General