Name: Grunbeck GENO-Multi Niveau
Brand: Grunbeck
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installation

23 | 64

BA_712940

-inter_175_GENO

-Multi Nive

au.docx

3. Install the fastening plate on the wall using the screws and

dowels provided with the device.

4. Check the installation for a firm hold.

5.3.3 Inserting the level probe into the tank

Designation

Threaded plug 1" (red)

Tank feed-through

Screw cap with seal and cable

bushing

Designation

Level probe with protective

hose

1. Remove the red threaded plug.

2. Insert the pre-assembled level probe into the tank until the

probe rests on the tank bottom.

3. Close the tank feed-through by means of the closing caps.

Questions and Answers:

Need help?

Do you have a question about the Grunbeck GENO-Multi Niveau and is the answer not in the manual?

Grunbeck GENO-Multi Niveau Specifications

General