Need help?Do you have a question about the Grundfos alpha2l and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Protection Class | IP42 |
| Maximum Operating Pressure | 10 bar |
| Enclosure Class | IP42 |
| Insulation Class | F |
| Pump Housing | Cast iron |
| Type | Circulator pump |
| Frequency | 50 Hz |
| Approvals | CE |
| Connection | G 1" |
| Ambient Temperature | Up to 40°C |
Provides instructions and figures for correctly mounting the pump in the pipework, ensuring correct flow direction.
Identifies and describes the key components of the control panel: indicator light, light fields, and push-button.
Details the seven different light fields used to indicate the selected pump setting and their corresponding curves.
Describes how to use the push-button to cycle through and select the desired pump setting.
Recommends specific pump settings for different heating system types, illustrating recommended and alternative settings.
Explains the two main control modes: proportional-pressure control (PP) and constant-pressure control (CP), and their effect on pump performance.
Explains the function of a bypass valve in ensuring heat distribution when radiator valves are closed.
Emphasizes filling the system with liquid and ensuring minimum inlet pressure before starting the pump.
Explains how different pump settings affect the pump's Q/H performance curves and power consumption.
To Next Page