3.4 Mounting the product
WARNING
Pressurized system
Death or serious personal injury
‐ Tighten the union nuts before opening the isolating valves. The
pumped liquid may be scalding hot and under high pressure.
The arrows on the pump housing indicate the flow direction through the pump.
1. Close the isolating valves and make sure that the system is not pressurized
during the installation of the pump.
2. Mount the pump with gaskets in the pipes.
3. Tighten the fittings.
4. Connect the plug to the socket, and switch on the pump.
Note that the pump is double insulated and does not require ground
connection.
Do not switch on the pump until the system has been filled with
liquid and vented.
TM086123
10
English (US)
To Next Page
Loading...
