1.3 Pumped liquids
The product is suitable for domestic hot water with unrestricted water hardness.
The kinematic viscosity of water is 1 mm
2
/s (1 cSt) at 68 °F (20 °C). If the pump
is used for a liquid with a higher viscosity, the hydraulic performance of the
pump will be reduced.
Example: 50 % glycol at 68 °F (20 °C) means a viscosity of approximately 10
mm
2
/s (10 cSt), reducing pump performance by approximately 15 %.
When selecting a pump, the viscosity of the pumped liquid must be taken into
account.
2. Receiving the product
2.1 Inspecting the product
CAUTION
Crushing of feet
Minor or moderate personal injury
‐ Wear safety shoes when handling the product.
• Make sure that the delivered product corresponds to the order.
• Make sure that the supply voltage and frequency correspond to the values
stated on the product nameplate.
7
English (US)
To Next Page
Loading...
