Grundfos MAGNA1 C - Maximum System Pressure; Disposal and Compliance; Product Disposal

English (GB)
15
Fig. 7
English (GB)
Dansk (DK)
TM06 9256 2017
Warning
If you replace a control box in a multipump system, make sure that
the new control box, model C or newer, always is the master
control box. Start the pump again. See section Multipump setup in
the installation and operating instructions for the pump.
If you use the inputs on one pump only, make sure they are on the
master pump.
Advarsel
Hvis du udskifter en kontrolboks i et flerpumpesystem, sørg da for
at den nye kontrolboks, model C eller nyere, altid er
masterkontrolboksen. Start pumpen igen. Se afsnittet
Flerpumpeindstilling i monterings- og driftsinstruktionen for
pumpen.
Hvis du bruger indgangene på kun den ene pumpe, sørg da for at
de er på masterpumpen.
Pumpland.ru