Declaration of conformity
16
– Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009.
– Low Voltage Directive (2014/35/EU).
Standards used: EN 60335-1:2012/AC:2014 + A11:2014,
EN 60335-2-51:2003/A1:2008/A2:2012.
– EMC Directive (2014/30/EU).
Standards used: EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:1997+A1:2001+A2:2008,
EN 61000-3-3:2013, EN 61000-3-2:2014.
– Ecodesign Directive (2009/125/EC).
Circulators:
Commission Regulation Nos 641/2009 and 622/2012.
Applies only to circulators marked with the energy efficiency index EEI.
See the pump nameplate. Standards used: EN 16297-1:2012 and EN 16297-2:2012.
This EC declaration of conformity is only valid when published as part of the Grundfos safety
instructions (publication number 99233377).
Bjerringbro, 13th June 2017
Andreas Bach-Pedersen
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EC declaration of conformity.
To Next Page
Loading...
