Grundfos MGE 71 - R100 Installation Menu: Digital;Analog I;O Functions

English (GB)
24
Digital input/output 3 and 4, Function
The digital input/output 3 and 4 can be set to these functions:
Possible functions, digital input/output 3
Possible functions, digital input/output 4
The number of available displays depends on the functional
module fitted in the motor. See below.
Analog input 1, 2 and 3, Function
The analog inputs can be set to these functions:
•Not active
• Feedback sensor
• Ext. setpoint infl.
For further description, see section 9. External setpoint signal.
• Other function.
The number of available displays depends on the functional
module fitted in the motor. See below.
Set to digital input Set to digital output
• Not active
• External fault
• Alarm resetting
• Reversing
• External stop
•Max.
•Min.
• Ready
• Operation
•Alarm
• Warning
• Limit 2 exceeded
• Limit 1 exceeded
• Running
• Not active
Set to digital input Set to digital output
• Not active
• External fault
• Alarm resetting
• Reversing
• External stop
•Max.
•Min.
• Ready
• Operation
•Alarm
• Warning
• Limit 2 exceeded
• Limit 1 exceeded
• Running
• Not active
Function (terminal) FM 100 FM 200 FM 300
Digital input/output 3, Function
(10 and 6)
●●●
Digital input/output 4, Function
(11 and 18)
--●
Function (terminal) FM 100 FM 200 FM 300
Analog input 1, Function (4) ●●●
Analog input 2, Function (7) - ●●
Analog input 3, Function (14) - - ●