Grundfos MGE 71 - Mobile App Control (Grundfos GO Remote); GO Remote Dashboard Overview; GO Remote Communication and Navigation

English (GB)
28
8.5 Grundfos GO Remote
The motor is designed for wireless radio or infrared
communication with the Grundfos GO Remote.
The Grundfos GO Remote enables setting of functions and gives
access to status overviews, technical product information and
actual operating parameters.
The Grundfos GO Remote offers three different mobile interfaces
(MI). See fig. 31:
Fig. 31 Grundfos GO Remote communicating with the motor
via radio or infrared light
8.5.1 Communication
When the Grundfos GO Remote communicates with the motor,
the indicator light in the middle of the Grundfos Eye will flash
green. See section 12. Grundfos Eye.
Communication must be established using one of these
communication types:
• radio communication
• infrared communication.
Radio communication
Radio communication can take place at distances up to
30 metres. It is necessary to enable communication by pressing
or on the motor control panel.
Infrared communication
When communicating via infrared light, the Grundfos GO Remote
must be pointed at the motor control panel.
8.5.2 Navigation
Navigation can be done from the dashboard. See fig. 32.
Dashboard
Fig. 32 Example of dashboard
TM05 5383 3612
Pos. Description
1 Grundfos MI 201 for Apple iPod
2 Grundfos MI 202 for Apple iPhone
3
Grundfos MI 301 for Android and iOS
(Bluetooth communication is required).
+
1
2
3
+
+
TM05 5609 3912
Pos. Description Action
1
Connection
indicator
This text appears when the
Grundfos GO Remote app has
connected to an MI 201, MI 202
or MI 301.
If the hardware is not connected,
it will not be possible to
communicate with a Grundfos
product.
2 Back button Returns to the previous display.
3
Product
information
Provides technical information
about the product.
4 Product name
Name of the product
communicating with the Grundfos
GO Remote.
5
Alarms and
warnings
Shows alarms and warnings.
6Grundfos Eye
Shows the operating condition of
the product.
7
Primary status
value
Shows the primary status value.
8
Secondary status
value
Shows the secondary status
value.
9 Control source
Shows by which interface the
product is controlled.
10 Control mode
Shows the control mode of the
product.
11
Actual setpoint
value
Shows the actual setpoint value.
12 Operating mode Shows the operating mode.
13 Show menu Gives access to other menus.
14 Stop Stops the product.
Tool bar
15 Help
The help function describes the
menus making it easy for the user
to change settings, etc.
16 Documentation
Gives access to installation and
operating instructions and quick
guides.
17 Report
Enables the creation of
user-defined reports.
18 Update
Enables update of the Grundfos
GO Remote app.
1
2
3
5
7
9
10
13
15 16 17 18
14
12
11
8
6
4