Grundfos rmq-a - User Manual

RMQ-A
Installation and operating instructions
GRUNDFOS INSTRUCTIONS

Grundfos rmq-a Specifications

General

Category	Water Pump
Series	RMQ
Material	Stainless Steel
Frequency	50 Hz
Pump Type	Centrifugal
Voltage	230 V

Summary

Symbols used in this document

Delivery

General description

Type key

Technical data

Operating conditions

Technical specifications for operational limits and parameters.

Dimensions

Physical dimensions and sketch of the RMQ unit.

Installation

Location

Guidance on selecting the proper installation location for the RMQ unit.

Mounting

Procedure for physically mounting the RMQ unit onto a wall bracket.

Connection to overflow

Instructions for correctly connecting the overflow pipe to the unit.

Connection of mains-water pipe

Details on how to connect the mains water supply pipe to the unit.

Connection of suction hose (rainwater collecting tank)

Steps for connecting the suction hose from the rainwater tank.

Connection of discharge hose

Instructions for connecting the discharge hose to the system.

Level sensor installation

How to properly install the level sensor in the collecting tank.

Start-up

Start-up via mains-water supply

Step-by-step guide for the initial start-up process using mains water.

Setting the collecting tank height

Procedure to set the desired water level indication on the control panel.

Control panel

Fault finding

Disposal

Suction lift;suction hose

Declaration of conformity