25
VI. DVD PLAYER OPERATION
a. Basic operation
1. Press the INPUT button on the remote control to select the DVD function
mode. Insert a disc into the slot of the DVD player and it will start to read
the disc automatically.
2. Press the
button on the remote control, the disc will automatically
eject.
Note: Insert the disc with reflective data side facing to the front of
the TV. Some slight picture and sound noise are produced when the
disc is loading, unloading and during playback. This is normal and
can be ignored.
HOW TO SELECT THE TRACK
If you want to play the second track or chapter, press the number button “2”
directly. Then press the ENTER button to play.
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the PLAY/PAUSE button once during playback.
Press the PLAY/PAUSE button again to resume normal playback.
HOW TO REMOVE THE DISC
Press the button on the remote control.
Wait until the disc is completely ejected before removing.
HOW TO STOP PLAYBACK
Press the STOP button once, the DVD video player will stop. Then press the
PLAY button to re-start the disc from the same point. Press the STOP button
twice, and disc will stop completely. Press the PLAY button to restart the DVD
playback from the start.
FAST FORWARD/ REWIND
Press the
or
buttons once for the disc to play forward or backwards.
With each subsequent press, the disc will play back at 2x, 4x, 8x, 16x or 32x
To Next Page
