GSi JK300HP User Manual

GSI Group - Laser Division
JK300HP/JK300P/JK125P
Pre-installation and User Manual Issue 2.0
Page 92 of 172 Part No: 1EA300E01
Possible causes:
1. Wiring fault in the power supply demand.
2. Faulty pulse generator card.
3. Faulty power supply.
7.6.15 Alarm 4n15 : Power Supply IGBT Fault
Meaning:
The power supply IGBT is faulty.
Possible causes:
1. Faulty power supply.
7.6.16 Alarm 4n16 : Power Supply Earth Fault
Meaning:
The power supply has detected earth leakage current.
Possible causes:
1. Broken lamp.
2. Lamp lead damage.
3. Lamp lead connection problem.
4. Faulty Power Supply.
7.6.17 Alarm 4n17 : Power Supply Input Voltage Loss
Meaning:
The power supply input voltage has fallen below operating limits while the laser was running.
Possible causes:
1. Mains input power interrupt.
2. Faulty mains input connections.
3. Faulty power supply.
7.6.18 Alarm 4n18 : Power Supply Contactor Out Fault
Meaning:
The power supply contactor is out when it should be in. The power supply should be on.
Possible causes:
1. Unexpected shutdown.
2. Faulty power supply.
7.6.19 Alarm 4n19 : Power Supply Shutdown During Operation
Meaning:
The Interlock Module detected power supply n had shut down while the laser was on.
Possible causes:
1. Unexpected shutdown.
2. Faulty Power Supply.
3. Faulty Interlock Module.
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. 92

GSi JK300HP Specifications

General

Brand	GSi
Model	JK300HP
Category	Measuring Instruments
Language	English