16
Description
Adjustment
The charge is not good ( Overcharge )
No spark
●
Measure of voltage between
rectifier polarities
Voltage is usual when
ignition switch is “On”
No voltage when ignition
switch is “On”
● black line of main cable
is broken
Any looseness or default of booster connection-peg
No
Yes
● connection-peg not
good
● booster not good
Use a new spark plunger then check
No or less sparks
●
Sparks OK
No
Any looseness between lid of spark and
between high-voltage lines
● Lid of spark is loosen
Yes
● previous Spark Plunger broken
Connection of CDI parts
OK?
Yes No
● Connecter is not good
Check statement and features of connecter of CDI and measure
the resistance
Reasons
To Next Page
Loading...
