31
Takes down four screws of oil tank
Take oil line and pressure line part from oil switch.
Take off oil tank
Oil Switch
1 Stops the engine, dismantles the oil line from the carburetor and check whether the oil stream to leave. After oil
switch and line is clean, there should be no oil leakage. Otherwise you should clean pressure line.
2 Dismantles the pressure line from the carburetor. With pressure oil leakage and without pressure no oil leakage,
then the switch is normal.
3 Switch negative pressure value: Above 130kpa.
4 Cooling System
Replacement of cooling liquid in Radiator
Oil Line
Pressured line
Oil switch
Im
ortant! NO SPARK!
Important! Before take off radiator lid
please make sure that cooling liquid is
NOT HOT.
Radiator Lid
To Next Page
Loading...
