EasyManua.ls Logo

GSW System Rapid - Names of Parts; Unpacking and Assembling

GSW System Rapid
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
This product should only be used under the
supervision of an adult.
This appliance should always be stored out
of reach of children.
The packaging must be disposed of safely to
avoid young children suffocating themselves.
Packaging is not a toy.
4. Names of parts
1
Helper handle
2
Lid
3
Two safety openings (one on each side)
4
Safety valve
5
Steam vent
6
Pressure regulator
7
Ribbed dial
8
Lock
9
Lid handle
10
Base handle
11
Gasket (not visible; inside lid)
12
Base
5. Unpacking and assembling
1. Take the individual parts of the appliance out
of the packaging.
2. Dispose of all the packaging.
3. Check that the appliance is not damaged in
any way.
4. Remove any labels which may be on the
appliance.
5. Check the safety devices (see "6.1 Preparing
the pressure cooker" on page 27).
Caution!
Before you use the appliance for the
first time it should be thoroughly cleaned to
ensure that any residue left over from production
is removed (see "7.2 Cleaning the pressure
cooker" on page 30).
6. Clean all the individual parts with hot
dishwater, rinse with clean water and dry
thoroughly.
7. Po ur i n aro und 2 l wa ter.
8. Operate the pressure cooker in position II for
about 30 minutes (see "6.2 Cooking" on
page 27).
9. Clean the pressure cooker again.
GSW-System-Rapid-3-2Liter Seite 26 Donnerstag, 31. März 2022 10:12 10

Table of Contents

Related product manuals