Gtec ZY120 - Page 39

39
ZY120 6-20kVA (11) User Manual EN rev.04.doc
RATE SET
OP
IP
FREQ HZ 50
V(LN) 230
V(LN) 230
60
230
230
7. Press “ENTER” button to confirm frequency selection, and the current parameters are shown on
LCD as below
RATE SET
OP V(LN) 230
IP V(LN) 230
FREQ HZ 60
8. Shutdown UPS completely and restart UPS to activate the setting. Enter in and enter in
system information to check if the rated setting has been activated as below