13
The brush bar can now be removed, starting at
the button end.
To remove hair from the brush bar, run the hair
removal tool down the groove to cut the hair,
then use the comb remove it.
Never operate the product without the brush
bar in place.
Before checking for a blockage, remove the
battery.
Rest the product on its side and locate
the brush bar button on the right hand side.
Press the button inwards and then pull
the brush bar out from the bottom of
the product.
5012_System_K9_UF_manual_aw.indd 135012_System_K9_UF_manual_aw.indd 13 18/05/2021 16:3418/05/2021 16:34
To Next Page
Loading...
