Gtech HT04 - Attachment Handling; Fitting and Removing Attachments

helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
10
Fitting and Removing the Attachments
WARNING: THIS MACHINE CAN CAUSE SERIOUS INJURIES.
THE SAFETY WARNINGS AT THE FRONT OF THIS MANUAL
SHOULD BE OBSERVED FOR ALL ATTACHMENTS.
Read all instructions carefully for the correct handling preparation, maintenance and starting and
stopping of the machine. Be familiar with all controls and the proper use of the machine. Do
NOT operate this machine if you are tired or under the inuence of drugs, alcohol or medication.
Depending on the conguration of your product, it may come supplied with different
accessories which can be tted on the tool.
WARNING: wear protective gloves when handling attachments particularly those with blades.
For additional safety remove the battery before changing accessories.
WARNING: immediately after use the attachment may become very hot, wear protective
gloves before handling.
WARNING: switch off the motor before tting or removing the blade.
Do not attempt to remove attachments while the motor is running and parts are moving.
All tool attachments are removed and tted in the same way:
Fitting the attachments:
Hook the attachment into the bottom rear of the head of the tool and push in a upwards
direction. You will hear the blade ‘Click’ into place.
Ensure the attachment is securely tted in position before starting the trimmer.
To remove the attachments:
Press both attachment release buttons at the same time. Be careful not to drop the
attachment when doing this.
Fitting and removing the hedge trimmer blade:
HT04 GenericManual09QVC.indd 10 23/12/2009 11:25