Gtech HT04 - Tool Adjustments; Cutting Head Adjustment; Telescopic Tube Adjustment

helpline 01905 345891 email support@greytechnology.co.uk web www.gtechonline.co.uk
12
Telescopic Tube Adjustment
The telescopic tube length on the trimmer can be adjusted, allowing you to reach difcult places
without the use of a ladder.
WARNING: switch off the motor before adjusting the head. Do not attempt to adjust the
telescopic tube while the blades are moving.
Grip the head of the product rmly and lift the latch on the lower handle.
Extend the telescopic tube to the required length.
Press the latch rmly down to lock the handle.
Ensure the latch is securely locked in position before starting the trimmer.
Cutting Head Adjustment
The cutting head of the trimmer can be adjusted to different angles, allowing you to comfortably
cut in different positions and conditions.
WARNING: switch off the motor before adjusting the head. Do not attempt to adjust the head
while the blades are moving.
Grip the head of the trimmer and press and hold the button on the side marked ‘PUSH’
Rotate the head to the desired angle.
Release the button to lock the head in your selected position.
Ensure the button and head are securely locked in position before starting the trimmer.
Open
Lock
Push
Telescopic
adjustment
HT04 GenericManual09QVC.indd 12 23/12/2009 11:26