Water
To replace the clean water tank, put the
bottom of the tank in the Orca first then push
the top in until it clicks shut.
Warning: do not use the Orca without
both water tanks fitted.
Fill clean water tank
Li the flap to add water to the tank.
The floor cleaning solution can be added to
the clean water tank if desired. Do not exceed
the recommended dose.
Do not fill the tank beyond the MAX level
marked on the tank.
Before first use fill the clean water tank.
Press the latch and remove the clean water
tank from the rear of the Orca.
Only use the Gtech recommended cleaning solution. Do not use cleaning products such
as washing up liquid, carpet cleaners, bleach, or any other cleaning substances or fluids
that may damage the product.
800ml max
6
1
1
2
2
To Next Page
Loading...
