Guardall G-DVR4 - Chapter 6 Utilities; 6.1 Restore Parameters

67
Chapter6 Utilities
There are many tools in “Utilities” menu. Including “Default Parameters”,
“Firmware”, “Hard Disk”, “Alarm Out”, “Reboot”, “Power Off”, “View Log” and
“System Information”.
Enter “Utilities” menu: Shown as Fig.6.1 below
Fig. 6.1 Utilities
6.1 Restore Parameters
Restore factory parameters for DVR. The IP address, gateway and port number
will not be restored. Shown as Fig.6.2 below
Fig. 6.2 Restore parameters