Guardall px - Appendix A - User Authorities

PX/QX/RX Version 4.20 User Manual – Issue B
- 33 -
Appendix A – User Authorities
All user options with the appropriate authority level are shown in the table.
Code Menu Option
Manager
Ordinary
Set/Uns
Set
Unset
Cleaner
Access
ATM
Log
Bank Reset
Guard
01 Unset
✓ ✓ ✓ ✗ ✓ ✓ ✗ ✓ ✗ ✗ ✗
02 Set
✓ ✓ ✓ ✓ ✗ ✓ ✗ ✓ ✗ ✗ ✗
03 Reset
✓ ✓ ✓ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✗
04 Test
✓ ✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
05 Engineer 1 1 1 1
✗ ✗ ✗ ✗ ✗ ✗ ✗
06 Code
✓
2 2 2
✗ ✗ ✗ ✗ ✗ ✗ ✗
07 User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
08 Tel Number
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
10 Log-Full
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
11 Log-Cct
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
12 Log-User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
13 Log-KP
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
14 Log-Date
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
15 Log-Alarm
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
16 A/Log-Full
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
17 A/Log-User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
18 A/Log-ACM
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✓ ✓
20 Time 3 3
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
24 Holiday
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
25 Schedule 7
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
26 Group Text
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
27 Minutes Left
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✗ ✗ ✗
28 Late Work
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
30 Bypass 4 4
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✓ ✗
32 Chime
✓ ✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
33 Shunt
✓ ✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
40 Print Text 5
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
42 Print Hols. 5
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
50 Add A/User 6
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
51 Delete User 6
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
52 Identify User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
53 Door Unlock 6
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
54 Door Lockout 6
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
55 ACM Text 6
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
71 Copy User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
73 Copy A/User
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
89 Cct Status
✓ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
Notes:
1. The Engineer option is not available to a user if the panel is programmed to allow the engineer
to log on without user authorisation.
2. The code option for some users will only be available if configured as part of the user
authority.
3. The time can only be changed by a user if programmed by the engineer. User time changes
are limited to +/- 75 minutes.
4. The bypass option is only available if at least one circuit has been programmed to allow
bypass.
5. The print options are only available of a printer is connected to the system.
6. The access options are only available if an ACM is fitted to the system
7. The schedule option is only available if programmed by the engineer.